Masonry · Brick cost tool

Brick Cost Calculator

Estimate brick material cost from wall area, brick size, waste and price per brick.

What this calculator measures

Brick cost is brick count times price per brick, plus mortar. This calculator converts a wall area into a brick count and a cost, with waste applied. It is useful for budgeting a masonry project before buying brick.

The tool keeps the base count, the waste-adjusted count and the cost separate.

How the calculation works

Bricks = ceil(wall area / brick face area × (1 + waste)). Cost = bricks × price per brick + mortar allowance.

The calculator computes the brick count from the wall area and brick face area, applies waste, and multiplies by the price per brick. It adds a flat allowance for mortar.

Because brick is sold by the piece or by the pallet, the count is the number to order. The waste percentage covers cuts and breakage.

Worked example

Using 200 ft² of wall area, 8 in × 2.25 in brick face, 10 % waste and $0.50 per brick, the calculator returns:

Wall area200 ft²
Brick face area0.125 ft²
Bricks (with 10 % waste)1,760
Brick cost$880
Mortar$120
Total$1,000

Two hundred square feet with 8 in × 2.25 in brick face needs 1,600 bricks. Adding 10 % gives 1,760. At $0.50 per brick, the brick cost is $880. Adding $120 for mortar gives $1,000.

Reading the result: the brick count is the number to buy; the cost is the material budget.

Inputs, field by field

  • Wall area (ft²): The wall area to be bricked. Use the brick calculator to compute it.
  • Brick length and height (in): The brick face dimensions. Common sizes are 8 in × 2.25 in and 7.625 in × 2.25 in.
  • Waste (%): 10 % for straight walls; 12 % to 15 % for walls with corners and openings.
  • Price per brick ($): Your quoted price per brick.
  • Mortar cost ($): A flat allowance for mortar.

Why the inputs matter

Wall area and brick size drive the count. Waste adjusts for cuts. Price is the market input.

Units and conversion checks

Area in square feet, brick dimensions in inches, price in dollars per brick.

Common mistakes with this calculation

  • Using the gross wall area without subtracting openings.
  • Using nominal instead of actual brick dimensions.
  • Underestimating waste for walls with corners and openings.
  • Forgetting mortar as a separate cost.
  • Treating the estimate as a firm quote rather than a planning figure.

Ordering and materials

Order brick by the piece or pallet, all from the same dye lot. Add a waste allowance and one extra pallet for defects. Confirm the brick type and color before ordering.

What this calculator does not decide

This tool does not determine structural suitability, mortar type, or code compliance. Those depend on the application and the applicable requirements. Where safety or regulated construction is involved, the project documents and qualified professionals take precedence.

Planning estimate only: Verify measurements, product data, project specifications and applicable requirements before purchasing or constructing.

Field verification checklist

Before ordering, recompute the wall area, confirm brick size and price, add a pallet for defects, and verify the dye lot.

Practical considerations for brick cost

Brick cost estimates must include the mortar, which is often 10 % to 15 % of the brick cost. Mortar is sold by the bag, and the amount depends on the joint width and the brick size. The mortar allowance in this calculator is a flat figure; adjust it to match your actual joint width.

Brick is sold by the piece or by the pallet, and pallets cannot be returned once opened. Order one extra pallet for defects and color matching, since dye lots vary between production runs.

Labor is usually the larger cost on a masonry project, often 50 % to 70 % of the total. The material estimate here is the material budget to compare against a quote, not the total project cost.

Detailed guide to brick budgeting

Brick installation is a skilled trade, and labor is usually the larger cost, often 50 % to 70 % of the total. The material estimate in this calculator is the material budget to compare against a quote, not the total project cost. Get written quotes that separate material and labor.

Mortar is a significant cost that is often underestimated. The amount depends on the joint width and the brick size, and a wider joint uses more mortar. The mortar allowance in this calculator is a flat figure; adjust it to match your actual joint width.

Brick is sold by the piece or by the pallet, and pallets cannot be returned once opened. Order one extra pallet for defects and color matching, since dye lots vary between production runs.

Related BuildNumeris tools

Construction estimates are interconnected. Open the related tools below to build a connected takeoff.

Practical workflow

Measure the wall area, choose the brick, calculate, then order with a waste allowance.